If you have your old mat
and it's not severely ripped:
(this requires
two people for proper measurements)
-
MEASURE ITS LENGTH. (NOTE
THE EXACT INCHES) DO NOT
MEASURE THE TRIANGLES BUT MEASURE TO THE
EDGE OF THE HEM. MEASURE ALONG THE EDGE OF
THE MAT. (ALSO, IF IT IS
NOT RIPPED, MEASURE IN THE MIDDLE OF THE
MAT. (NOTE THE EXACT INCHES.)
-
COUNT HOW MANY RINGS/GROMMETS DOWN THE
SIDE OF THE MAT. (NOTE HOW THE SPRINGS HOOK
INTO THE MAT.)
If you don't have your old mat:
Observe
how the spring actually "hooks" into or
attaches to the frame. There are many
different methods.
-
WHERE THE SPRING
ACTUALLY HOOKS/ATTACHES TO THE FRAME,
MEASURE STRAIGHT ACROSS TO THE OPPOSITE
SIDE, WHERE THE SPRING HOOKS TO THE FRAME.
(NOTE THE EXACT INCHES)
-
COUNT HOW MANY
SPRINGS ARE NEEDED ON EACH SIDE FOR A TOTAL
COUNT. YOU MAY WANT TO ORDER SPRINGS SO
INSPECT THEM FOR DAMAGE AND THE PROPER
QUANTITY NEEDED.
-
MEASURE THE TOTAL
LENGTH OF ONE SPRING OFF OF
THE TRAMPOLINE INCLUDING HOOK TO HOOK. (A
GOOD SPRING RECOILS TIGHTLY, WITH NO GAPS
BETWEEN COILS.)
-
NOTE HOW THE SPRING
HOOKS INTO THE MAT.
|
