If your frame is
assembled:-
WITH
A MEASURING TAPE THE FULL LENGTH (DIAMETER) OF YOUR TRAMPOLINE,
MEASURE ACROSS THE MIDDLE, FROM OUTSIDE TO OUTSIDE OF THE FRAME.
NOTE THE EXACT INCHES.
(The measurement of one
leg post to the opposite leg post will help insure you are
measuring across the middle of the trampoline.) THIS IS A 12
O'CLOCK TO A 6 O'CLOCK MEASUREMENT.
- MEASURE AGAIN ACROSS THE MIDDLE, THE DIAMETER OF THE FRAME,
BUT WITH A 9 O'CLOCK TO A 3 O'CLOCK MEASUREMENT. NOTE THE
EXACT INCHES. (Do not round off or convert to
feet and inches.)
If your frame is
unassembled but you have your mat:
-
IF YOU HAVE YOUR MAT (AND IT
DOES NOT HAVE A TEAR); MEASURE JUST THE
BLACK PART, EDGE TO EDGE. DO NOT INCLUDE
THE TRIANGLES. MEASURE TWICE LIKE STEPS ONE AND TWO
DESCRIBED. NOTE THE
EXACT INCHES.
- COUNT HOW MANY SPRINGS IT TAKES. COUNT HOW MANY SPRING HOLES
IN THE FRAME FOR MORE ACCURACY. (Then count how many springs you
have, in good condition, recoiled and with lots of tension. You
may be missing springs or want more tension)
- TAKE A SPRING OFF THE TRAMPOLINE & MEASURE IT INCLUDING THE
HOOKS TO DETERMINE THE CORRECT LENGTH. (The spring coils must be
fully recoiled to obtain the proper length).
- HOW DO THE SPRINGS "HOOK" INTO THE MAT? TRIANGLES, GROMMETS,
ETC..
- HOW DO THE SPRINGS "HOOK" ONTO OR INTO THE FRAME?
|
